Power gel concrete MTOMIX 4600 Clinic Beton Iran

MTOMIX 4600 concrete supplement or concrete supplement, in addition to being used in making concrete with high strength, waterproofing, low permeability, high durability and special mortars, in concretes that reduce plastic cracks, improve the relative tensile and bending resistance of concrete. The opinion is applicable. It is also recommended to use MTOMIX 4600 concrete supplement in situations where the concrete is subject to impact and intermittent dynamic loads. The concrete supplement is suitable for use in coastal concrete, tanks, water and sewage treatment plants.

Additional applications of MTOMIX 4600 concrete:
Making high-strength concrete
Concreting in areas under the attack of chemical substances, such as the northern and southern regions of the country and salt marshes
Concrete construction of docks, bridges, reservoirs, sources, etc.
Construction of concrete for treatment plants and sewers
MTOMIX 4600 concrete power gel performance:
Raise the slump
Fixing the permeability of concrete
Preventing the entry and penetration of chlorine ions and other harmful chemicals into concrete
The possibility of reducing the water disturbance of concrete
Compatibility with all types of Portland cement
Reduction in the cost of making concrete
Accelerating the time of making concrete and easy transportation
increase in compressive strength by about 30%
Reduce consumption by about 10%.
The possibility of replacing type 2 cement with type 5
Increasing erosion resistance
Amount of MTOMIX 4600 concrete supplement:

It is always recommended that depending on the type of concrete, usage, slump, mechanical properties, place of implementation and required compressive strength, the amount of consumption should be determined by workshop tests, so this amount will be in the range of 5 to 9 percent of cement weight.

How to take MTOMIX 4600 concrete power gel supplement:

MTOMIX 4600 concrete supplement can be added to concrete in two ways:

After complete mixing of all concrete components
Dissolve concrete in water and then add to dry ingredients
Physical characteristics of MTOMIX 4600 concrete supplement:
Physical state: paste
Specific gravity: 1.15 gr/cm3
pH: 9
Color: dark brown
Solubility: in water

One of the reasons for the vulnerability of concrete can be the soluble osmium hydroxide Ca(OH)2, which forms about a quarter of the concrete when the cement in the concrete is hydrated. MTOMIX 4600 concrete admixture due to the very small cross-section of its constituent components, which mainly consists of Sio2, has a great desire to react with unstable calcium hydroxide (a factor of permeability and intensification of concrete alkalization), which ultimately results in very hard and impossible calcium silicate. It produces dissolution.
One of the prominent characteristics of calcium silicate is its resistance to sulfates, nitrates, chlorine ions and the alkaline reaction of stone materials. Therefore, if there is no access to type 5 cement, we will improve the quality properties of concrete and its reliability by using concrete supplement and type 2 cement.
Supplementing concrete due to modified polymers with long chain length and having the necessary catalysts, during the construction of the mixing plan by reducing the water-cement ratio by 10%, in addition to raising the slump and making self-compacting concrete, the inclination of the compound 2 (Ca (OH and It increases and accelerates Sio2, and after hydration, we see a better combination of the mentioned molecules.
The presence of a catalyst in the concrete supplement will accelerate and complete the reaction of this additive with concrete, and compared to the mixing design made with microsilica and lubricants, it is improved by about 15% due to the removal of the limited reactant. At the same time, this catalyst prevents wastage and completes the reaction added to concrete. Therefore, the consumption of concrete supplement will be about 1.5% to 2% less than the consumption of MTOMIX 4500 microsilica gel in old mixing designs that were made using microsilica and lubricants.
In addition, among other defects of concrete, we can refer to the shrinkage caused by water evaporation and the formation of capillary tubes after the hydration reaction, which is due to the presence of crystal-forming polymer chemicals with a free structure and very small molecules at the time of making concrete. In the whole mixture, they are scattered and block all pores and capillary tubes. However, in mixing plans where microsilica and lubricants are added separately to concrete, due to the lack of the aforementioned polymers, such a reaction will not be possible at all. We know that permeability has a direct relationship with the intensity of carbonation, the addition of concrete, due to its high ability to form crystals and to react with Sio2 in microsilica, has a significant role in reducing permeability and by forming calcium silicate and reducing Ca( OH)2 ratio in concrete reduces the risk of concrete cancer (A-A-R). Substitution of concrete supplement in mixing plans instead of microsilica and softening materials, in addition to improving the quality of concrete and greatly affecting its reliability, will reduce the cost of concrete by 5-7%, and using a concrete additive during construction The mixing plan will reduce the risk of not having accurate workshop control and compliance with proportions.

Chemical characteristics of MTOMIX 4600 concrete supplement
Water-sealing and crystal-forming polymers
The new generation of concrete super-lubricant
Microsilica
Catalyst and fillers
Ingredients of MTOMIx 4600 concrete power gel:

This product should not be mixed with any other material unless it is approved by the specialists of Concrete Clinic Iran.

How to store MTOMIX 4600 concrete supplement:

MTOMIX 4600 concrete supplement should be stored in its original container at a temperature of +5°C. If it freezes, you can heat it slowly and stir it to recycle again. Failure to observe proper storage conditions may damage the product or its container.

Additional protection and safety of MTOMIX 4600 concrete:

MTOMIX 4600 concrete supplement does not contain any dangerous substances.

Purchase and price of power gel concrete MTOMIX 4600

Making the market is a database and a network of manufacturers and suppliers of construction products that introduces companies and specialized reviews of construction products. The overall goal of building an established market

It is a direct relationship between the buyer and the producer. Dear buyers, to know the price of other concrete additives, they can refer to the system of making the market and buy MTOMIX 4600 concrete power gel from reliable sellers.

Manufacturers and suppliers can register in the market construction system and participate in the special sales festival by placing construction products and inserting the suggested price and increase the sale of their products.