MTOIL 400 molding oil Clinic Beton Iran

Solvent-based mold releasing oil is used on the mold surfaces before concreting and in order to facilitate the opening of the mold and make the final concrete surface uniform, soft, smooth and without surface bubbles.
MTOIL 400 mold oil is a mold releasing oil based on suitable chemicals, which is used on mold surfaces before concreting and to facilitate mold opening. After opening the mold, the final surface of the concrete will be uniform, soft and smooth, while surface bubbles will also be reduced. MTOIL 400 molding oil is sprayed on the mold surfaces as a very thin layer.
Solvent-based mold release oil for use on mold surfaces before concreting and in order to facilitate the opening of the mold and create a uniform, soft, smooth, and bubble-free final concrete surface.

Method of using MTOIL 400 molding oil

MTOIL 400 formwork oil is formulated for use on wood, plywood, steel and compressed plastic surfaces, which must be sprayed before concreting so that the formwork can return easily.
After opening and cleaning the mold for each concreting, garden style sprayers are the best means of spraying MTOIL 400 Concrete Forming Oil. If all the oils are absorbed by the new fat surfaces in the first run, it is necessary to repeat the oil sprinkling once more so that the mold surfaces are greasy before concreting. MTOIL 400 formwork oil is formulated for use on wood, plywood, steel and compressed plastic surfaces, which should be sprayed before concreting to allow the form to return easily.

MTOIL 400 molding oil consumption

It is important to note that only a thin coating remains on the surface and the excess oils are removed. Try to adjust the degree so that a very thin layer is sprayed. You should avoid consuming too much of it. It is also suitable to use a brush

Performance of MTOIL 400 molding oil

MTOIL 400 concrete molding oil reacts with cement and separates the concrete from the mold surface. As a result, the concrete surface that is in contact with a layer of MTOIL 400 molding oil will be uniform, soft and smooth after opening the mold. MTOIL 400 does not have a negative effect on the properties of concrete, if it is used in the recommended amounts, it does not cause the internal adhesion of concrete components.

MTOIL 400 molding oil packaging

MTOIL 400 mold oil is available in 20 and 220 liter containers.

Formulations of MTOIL 400 molding oil

A low-concentration petroleum substance, combined with chemicals to release the mold.

Features and physical and chemical characteristics of MTOIL 400

Mold oil does not contain chlorine and is known for its amber color. This oil has a specific weight of 0.85 grams per cubic centimeter. Low-concentration petroleum products combined with chemicals are used to release the mold.
Color: Amber
Specific weight: 0.85 grams per cubic centimeter
Chlorine content: no chlorine
Freezing temperature: -10 degrees Celsius
Flash point: +66 degrees Celsius

Applications of MTOIL 400 molding oil

Before pouring and immediately after opening and cleaning the mold for each concreting, garden style sprayers are the best means to spray MTOIL 400 mold oil. Try to adjust the degree so that a very thin layer is sprayed. Avoid consuming too much of it.
Using a brush is also suitable, but it should be noted that only a thin coating remains on the surface and excess oils are removed.
If all the oils are absorbed by the new fat surfaces in the first run, it is necessary to repeat the oil sprinkling once more so that the mold surfaces are greasy before concreting.
To be used on the mold surfaces before concreting
MTOIL 400 formwork oil is formulated for use on wood, plywood, steel and compressed plastic surfaces, which should be sprayed before concreting to allow the form to return easily.
Using MTOIL400 molding oil on wooden surfaces will give better results.

Coating surface of MTOIL molding oil

MTOIL 400 molding oil coverage is 30 to 70 square meters per liter, depending on the smoothness of the surface.
Note: Repeated use of MTOIL 400 molding oil on wooden surfaces will have gradually better results because they are easily released when they are saturated with oil. consumed
Caring for work equipment:
There is no problem with MTOIL 400 mold oil remaining in the gun or sprayer, but in some devices, the rubber washers may soften in constant contact with this product.

MTOIL concrete molding oil storage method

Keep this product covered and away from sunlight and high temperature. It has a shelf life of one year if stored in an unopened container.
Not paying attention to the proper storage method will damage the product or its container.

Properties and effects of MTOIL 400 molding oil

* Ease of opening the mold and making the final concrete surface uniform, soft, smooth and without surface bubbles.
* Reduction of surface bubbles
*Separation of concrete from the mold surface
* It does not have a negative effect on the properties of concrete and does not cause the lack of internal adhesion of concrete components.

MTOIL 400 molding oil considerations

The freezing point of MTOIL 400 molding oil is -10 degrees Celsius.
The flash point of MTOIL 400 molding oil is +66 degrees Celsius.

MTOIL 400 molding oil protection and safety

In order to preserve MTOIL 400 mold oil, this product should be kept in a covered environment and away from sunlight and high temperature. The useful life of this product will be for one year if it is placed in the right conditions and not opened in the container. If you do not observe the preservation and safety of this product in a proper storage method, it will cause damage to the product

or its container will be.

Purchase and price of MTOIL 400 molding oil glue

Making the market is a database and a network of manufacturers and suppliers of construction products that introduces companies and specialized reviews of construction products. The general purpose of building a market is to establish a direct relationship between the buyer and the producer. Dear buyers, to know the price of molding oil, refer to the market system and buy MTOIL 400 molding oil from reliable sellers.

Manufacturers and suppliers can register in the market construction system and participate in the special sales festival by placing construction products and inserting the suggested price and increase the sale of their products.