Market construction
Market construction
Market construction
Basic Materials
Concrete Additives
MTOTOP 900 concrete hardener Clinic Beton Iran

MTOTOP 900 concrete hardener Clinic Beton Iran

Clinic Beton Iran
Iran

MTOTOP 900 concrete hardener:

Pre-mixed at the factory which is a guarantee of quality
Running a cloth on fresh concrete
You can also make a price as a seller
Request a price to negotiate and get a better offer

Suppliers

SuppliersExpiration datePrice (Toman)Minimum order (MOQ)CityPhone number
The price is not recorded

similar products

MTOTOP 900 concrete hardener Clinic Beton Iran

Hardening spray of concrete surface (hardener) consisting of synthetic mineral aggregates and cement. It is a ready-to-use product consisting of MTOTOP 900 concrete hardening mineral artificial aggregates and cement that is applied dry-sprayed on fresh concrete surfaces. Provides continuous protection against successive uses, impact and wear for MTOTOP 900 concrete surface hardener. It also shows high resistance to industrial chemicals, fats, industrial oil, detergents and hydraulic fluids found in the aviation industry.

Premixed dry shake surface floor hardener

Primary applications of concrete hardener MTOTOP 900

It is designed in such a way to ensure the optimization of durability in conditions where MTOTOP 900 concrete hardener concrete floor is subjected to medium or heavy traffic and also when it is considered to be dustproof.

MTOTOP 900 concrete hardener applications

  1. workshops
  2. Power plants
  3. Garages
  4. Parking lots
  5. Warehouses
  6. Loading areas
  7. factories
  8. Shipbuilding workshops
  9. Airplane hangars
  10. Multi-storey parking lots
  11. car washes
  12. The landing place of helicopters

MTOTOP 900 concrete hardening compounds

MTOTOP 900 cover hard concrete is composed of high-quality non-metallic artificial inert aggregates, exclusive chemicals, pigments and cement.

Features and characteristics of MTOTOP 900 concrete hardener

  • pre-mixed in the factory which is a guarantee of quality
  • Running a cloth on fresh concrete
  • Fast execution resulting in time savings
  • Easy implementation
  • Better protection of seams, by applying more material at the end of the piece
  • Its resistance to erosion, wear and impact is higher than ordinary concrete
  • It does not oxidize
  • Non-slip final surface
  • High impermeability compared to concrete under equal conditions
  • The MTOTOP 900 concrete hardener has become a part of the concrete structure and therefore it is neither tamped nor separated.
  • Does not get dust
  • It is suitable for indoor and outdoor use
  • Easy cleaning
  • Affordable
  • With no need for maintenance, you have a long-lasting performance

MTOTOP 900 concrete hardener packaging

  • MTOTOP 900 concrete hardener is supplied in 25 kg bags.
  • Typical physical properties of concrete hardener MTOTOP 900
  • The properties listed below are for guidance only and are not a guarantee of performance.
  • Chemical resistance: if processed properly, it resists machine oils, minerals, weak acids, salt solutions of 10% sea water, alkaline solutions up to 25%.
  • Abrasion resistance: In the test according to ASTM C1353, when MTOTOP 900 concrete hardener is applied at 5 kg/m2, it shows almost 240% more abrasion resistance
  • compared to the control concrete.

 

method of using MTOTOP 900 concrete hardener

In compliance with ACI 302-1 R-89 and ACI 201-2RR77, the presence of concrete with a proper mixing plan is required. The concrete producer must be sure that the ratio of water to cement, the amount of cement, and the flow rate are in accordance with the minimum standard and according to the following values:

  • Cement (SRC or OPC): at least 320 kg per cubic meter
  • Water to cement ratio: 0.5 max
  • At least 0.4
  • Slump: desirable 75 mm
  • Strength: at least 31 N/mm2

Concrete should not have separation or water leakage, and it should not contain more than 3% of air. When we apply this product on concrete with microsilica, we must be careful with the application time. For the best performance, it is recommended to use water-reducing additives such as mtoplase or mtocrete in concrete. The concrete layers on which the MTOTOP 900 concrete hardener is applied must have a minimum thickness of 75 mm. After concreting, the surface of the concrete should be leveled using a bar and then vibrated.
Level the concrete surface with a wooden trowel to avoid excessive polishing. Fix surface leaks. (Do not use a sponge) Spray MTOTOP 900 concrete hardener on the sides of the executive parts (where the executive and expansion joints are found) to a width of approximately 80 mm. Spread them on the surface using a wooden trowel.
MTOTOP 900 concrete hardener is ideally applied to a surface that is neither too dry nor too wet. The ambient temperature is the main factor determining this time. Normally, at temperatures of 35 to 45 degrees Celsius, a time of 30 to 40 minutes after concreting is suggested. This period will be longer at temperatures below 35 degrees Celsius. With the help of a long stand that runs the length of the concrete block, spread the rod material by hand on the wet concrete surface. The implementation is done in two stages.

  1. Sprinkle two-thirds of the required material on the concrete surface, making sure to spread it evenly.
  2. Allow the applied material to absorb moisture from the surface, a solid dark color will be visible.
  3. Using a wooden trowel, spread MTOTOP 900 concrete hardener on the surface to ensure that it is uniform with the original concrete surface.
  4. Apply the rest of the materials and after the color of the materials has darkened, spread them on the surface again with a wooden trowel.
  5. When the surface is hard enough to accept the weight of a person and only a small indentation appears in his footsteps, the MTOTOP 900 concrete hardener should
  6. be completed using a butterfly trowel. A smooth and non-slip surface will be obtained, but you should not work too much on the surface.
  7. If the final smoothing is done using a hand tool such as a metal trowel, this should be done before the concrete hardens for traffic.

Concrete hardening performance of MTOTOP 900

Processing should be started immediately after the last troweling. This can be done by covering the surface with plastic sheets or by using curing materials. It is recommended to use MTOCURE at the rate of one liter per 5 square meters. Get more recommendations about processing materials from Iran's concrete clinic experts because the choice of materials can vary according to possible subsequent work on the surface.

practical tips in using MTOTOP 900 concrete hardener

Dry spraying should not be done in direct sunlight or in hot winds. The above care prevents early clay drying at a depth of 5 to 10 mm on the surface of the material and prevents its peeling and separation from the moist concrete below. The above adverse event will show itself when troweling. Like other concrete surfaces, the processing or curing of concrete and its time after the execution of concrete surfaces is very important and fundamental and must be done quickly after execution.
Coatings of one color can also be applied on the finished surface of MTOTOP 900 concrete hardener, but before choosing them, you must pay attention to materials such as the type of processing, the shape of the surface texture, and other things. (with expert department) Please contact Iran concrete clinic technician for further guidance.

MTOTOP 900 concrete hardening coating surface

The amount of material used can be between 3 and 7 kg per square meter, but in most industrial cases, a coating of 5 kg per square meter is recommended. For more information, contact the Iran concrete clinic technical service office.

How to store MTOTOP 900 concrete hardener

Keep under cover. Store away from direct sunlight and high temperature. The shelf life of this product is 12 months under proper storage conditions. Failure to observe the proper storage method will damage the product or its packaging.

protection and safety of MTOTOP 900 concrete hardener

This product contains cement materials that can cause irritation. Avoid contact with eyes and long contact with skin. If contamination occurs, wash with water and inform the doctor. Prevent children from accessing it.

 

Purchase and price of MTOTOP 900 concrete hardener

Making the market is a database and a network of manufacturers and suppliers of construction products that introduces companies and specialized reviews of construction products. The general purpose of building a market is to establish a direct relationship between the buyer and the producer. Dear buyers, to know the price of concrete hardener, refer to the market system and buy MTOTOP 900 concrete hardener from reliable sellers.

Manufacturers and suppliers can register in the market construction system and participate in the special sales festival and increase the sales of their products by placing the construction products and inserting the suggested price.

User's comments and scores