levelling device NA532 Leica

Including devices primary used to align the positioning level of water (Water Level) is by the ancient Iranians to be. This alignment with. the tube of the straw has been that the middle of it hole and per head it Hole small, attached to a rope will. Two people each head, the rope on a piece of wooden graded keep saying, then people in third bowl from the middle hole with water Reed fall sown , if the water from each of the holes of the two head to the extent of inequality and women to wear perfume, head tanabi that more high was located, so the bottom of the  to  identical from the two head drain . The size of the head the wood and place the rope height difference between the two was spot on.Day of the alignment of the glass that holds the bubble was use was . In other countries the alignment of the glass has a curvature, a certain was, that in the event of horizontal, being the balance of the bubble perfectly in the middle of the alignment of the incident . In later years, the ... factory, manufacturer, fixtures, mapping, embedding one or two numbers align on the side of the camera, it possible to provide believed that when the bubbles align in the middle is the axis of the cue on the camera is also horizontal crafted. Thus, by moving the side axis, the sign on a horizontal surface in space is created. With the help of this axis height difference between two points the measurement is. Thus, alignment of the optics(Optical Level) was produced. The balance on the tripod, and install with three screws set the axis indication on the camera for horizontal incident and move side camera-page horizontal in the space made was.Devices leveling just to be able to create a square, horizontal, in space were, and to determine the elevation difference of the points from the pieces, graded the wood that the same indicators are used was.Adding a page, a graded horizontal to the camera, the possibility of measuring the horizontal angles between the two stretches on the ground to this vehicle was added. (Source the book the basics of mapping - Avalanche Saint NIA)is a device leveling (new) from a few part has been formed: telescope alignment page calibrate the angle of the horizontal screw set  Compressor ( some models)the above product leveling  the company "Leica" (Leica) that of the diameter of the lens and magnification well. The diameter of the lens 36 mm and enlarge it 32 times. This product error bit equal to 1.6 mm in a km benchmarking is. The sensitivity of the alignment of the spherical this leveling 8/2 inches over mm. leveling autumatic above, horizontal rotation 360 degree and its overall weight of 2 kg. This product based on the standard IP56 is made, and against moisture and dust resistant it. hence the use of this leveling in adverse weather conditions is also possible.The field of view leveling (NA532) at a distance of 100 yards, 2.1 km and has a minimum focusing distance is 1 meter. Company, Leica, to avoid damage to The leveling when carrying the bag strong, for it has designed. The use of this product for people who for professional and specialized construction projects and mapping the operation is very convenient.Specifications :- standard resistance IP56 against moisture and dust - constant factor: 100 - horizontal rotation 360 degree - rated bags plastic sturdy - has a wrench for the amount of standard deviation for the distance of 1 km: 1.6 mm - has a total weight of 2 kg