Market construction
Market construction

Hollow clay block 15*20 Gorgan Zamin

Gorgan Zamin
Iran

Clay block is a type of block that is used to make it clay and other additives such as lime and so on. Clay blocks are used in non-load-bearing sections of the building. Clay blocks are used in different types of wall and ceiling (block joist roof).
You can also make a price as a seller
Request a price to negotiate and get a better offer

Suppliers

SuppliersExpiration datePrice (Toman)Minimum order (MOQ)CityPhone number
The price is not recorded

Hollow clay block 15*20 Gorgan Zamin

Walls made of clay block have been one of the most common and oldest lightweight walls. After preparing the mud and molding and cutting, the blocks are dried and then cooked in the oven at 900 ° C. The operation is industrial and performed by machinery. Clay block is the most widely used type of material in clay and water masonry walls that are manufactured as perforated molds in various dimensions.

Clay block specifications:

Clay blocks of 5 to 20 cm thick are manufactured for various applications. Dense, resistant ceramics will bump into each other and will not line up by pulling the nail on them. High-quality ceramics are uniform in color and have no cracks. Also its absorption rate should be between 8 and 16%.

Advantages:

The main advantage of clay blocks over cheaper similar products is that it is still used by some manufacturers despite the disadvantages of clay blocks.

Disadvantages:

Inadequate usability is a disadvantage of clay block due to its fragility, non-bearing due to ultra-low compressive strength, high threshold due to its crisp and unbearable load bearing components and lack of thermal insulation. The walls made with these blocks are not only soundproof but also resonant. They also require a thick layer of plaster to smooth the wall surface. Due to the small size of the clay block, it takes a lot of time and energy to run these walls.

Length (mm)
200
Width (mm)
150
Height (mm)
200
Exterior wall thickness (mm)
9
Inner wall thickness (mm)
7

Technical Specifications

Deviation from the bed
1.5-3
Dissolved magnesium sulfate content (%)
0.12
Flexural strength (N)
500

User's comments and scores