Market construction
Market construction

Sewage pumps PD Saer

Saer
Italy

The sludge pump is a group of centrifugal or centrifugal pumps and is used to transport and pump liquids with solid and suspended particles such as turbid water and industrial and domestic wastewater. These types of pumps are suitable for pumping liquids containing suspended solids and long fibers, sewage, polluted waters, turbid water, abrasive fluids and so on. Sludge pumps are sometimes referred to as concentrated pumps, sewage pumps, slurry or slurry pumps and mud pumps.
You can also make a price as a seller
Request a price to negotiate and get a better offer

Suppliers

SuppliersExpiration datePrice (Toman)Minimum order (MOQ)CityPhone number
The price is not recorded

similar products

Sewage pumps PD Saer

Submersible and dry sludge pump:
The sludge pump is produced in both dry and submerged types. The submersible sludge pump is manufactured with an outlet of 1.5 inches to 20 inches. Each submerged sludge pump is also used in both fixed and removable installation. This type of sludge pump has IP68 protection and can be fully immersed in the fluid. Passing the fluid around the electromotor, which is fully sealed, will cool the electromotor and thus increase its service life, as well as increase the efficiency of the motor by reducing the current.
In the dry sludge pump, the electromotor is at the desired height outside the fluid, and the pump is immersed in the fluid. The two are connected through a coupling so that the electromotor can be easily separated if needed.

Application:
Suitable for wastewater systems, contaminated water with particulate matter, home sewage stations and restaurants

Product Specifications

Insulation class
F
Material of butterfly
Bronze - cast iron and steel
Power (W)
37000 - 22000
Degree of protection
IP68
Head minimum (m)
40 meters (2900 rounds) 34 meters (1400 rounds) 15 meters (950 rounds)
Maximum flow rate (m2/h)
105 cubic meters per hour (2900 rpm) 516 cubic meters per hour (1400 rpm) 324 cubic meters per hour (950 rpm)
Maximum fluid temperature (C °)
40
Mechanical flood
Silicon Carbide and Tungsten

User's comments and scores