Market construction
Market construction

Galvanized Cable Tray 10cm Miscellaneous Brand

Miscellaneous Brand
Iran

The width of the sheet 10 centimetres - the depth of the tray 4 cm - thickness of the sheet tray power 0.7 in. 1 in. to 1.25 in. by 1.5 and 2 mm - the depth of the tray 4 cm - build quality, high - body-galvanized fabric - accessories individually should be prepared.
You can also make a price as a seller
Request a price to negotiate and get a better offer

Suppliers

SuppliersExpiration datePrice (Toman)Minimum order (MOQ)CityPhone number
The price is not recorded

Galvanized Cable Tray 10cm Miscellaneous Brand

Cable tray, galvanized width 10 cm product is to end up wiring a building is used and the path for the passage of wires and cables to bring that together, Order have a better and also against damage and different conditions, be protected. This product has a depth of 4 cm is that the system is structural metal and hardness is the resistance of the upper against corrosion and rust and can be on the ground. on the wall or on the ceiling used.Tray power that looks similar to the duct and tranking are task-driven, transmission, and protection of this equipment will have, with the difference that the body of the product metal and can be used with the tray door or without door, used. For the overall tray Electrical for electroplating has been used, which are usually two methods for the plating of these products goes to work : a hot dip galvanizing and other galvanized iron or cold fabric, that overall, in environments typical of the cable tray, galvanized cold can be used, but if your environment is wet is better than cable tray hot dip galvanized use. Galvanized steel down lead product against chemicals well protected that in Model G tray Electrical for the bath, the metal on the immersed work, so a layer of the product takes place and causes together in an environment of open and also for industrial applications to work. In galvanized, cold immersion in the bath of molten not be done and the tray immediately after cutting and drilling bending can be.

Product Specifications

Body Material
Metal
the cover
Galvanized plating
Cable tray sheet thickness (mm)
0.7 | 1 | 1.25 | 1.5 | 2
Depth (cm)
4
Width (cm)
10

User's comments and scores