Optical parking lift Sommer

A flasher is a warning lamp that is placed outside or inside a parking lot and flashes when the parking jack is operated, as defined in the steering circuit and programming board, and is switched on and off. Parking door flasher and parking door flasher are installed in the top safe of Iran.

What is the function of the flasher?

The flasher actually activates the parking signal to announce the start or end of the parking jack to the user and acts in different ways in different situations.

In some parking jacks, the command to flash and turn off the flasher is issued from the jack circuit of the jack, and in others, the control circuit gives only constant power to the flasher, and the automatic switching on of the flasher is performed by the IC programmed inside. The parking door door flasher is installed in the top safe of Iran.

Flashers also have 2 types, 24 volts and 220 volts.

The type of flasher blinking in many of the command circuits of Iranian and Italian parking jacks, as well as shutters and barriers, is such that when the door is opened, the flasher flashes quickly and turns on and off every second or load, and when When the door is closing, it blinks slowly and turns on and off every 2 seconds.

Automatic door flasher (electromechanical-hydraulic) is actually a flashing lamp that is installed above the entrance door to inform others about the working condition of the door. Generally, yellow flashers light is a warning sign in the new model of door jack flashers. Partco parking is also used in the yellow range. This new flasher starts working when the door is opened or closed and turns off when the door is closed.

The use of new lamps in these flashers, in addition to creating more light to inform others, has a very long lifespan and greater resistance to various climatic conditions. In general, the working voltage of the flasher is always equal to the working voltage of the jack. But if the operating voltage of the flasher is 24 or 220 volts, the flashing circuit is inside the flasher itself.

Despite its small and elegant appearance, the German Zoomer automatic door eyepiece has an IP54 protection standard that enables it to be resistant to dust and moisture. This eyepiece has a voltage of 24 meters and a viewing angle of 20 meters. The procedure is such that the eyes should be placed exactly in front of each other and so-called see each other; The method of operation is such that normally a pulse is exchanged between the two eyes and gives a message that the circuit is closed to the central device and the device concludes that everything is in order and the door will open and close normally. If the pulse is not exchanged between the two eyes, there is an obstacle in front of the eye in terms of the central device and it prevents the door from closing.