Chair spacer 40 Beton Plast

Spacers are efficient components in the building industry that offer many other advantages besides creating the right rebar cover. Spacers or spacers are designed and manufactured in various sizes to create rebar covers from 15 mm to 150 mm. The most important weakness of a reinforced concrete structure is the corrosion of the bars. Air, moisture, chlorides, sulfonates, and other corrosive environmental agents can penetrate the concrete into the concrete, which in turn will cause serious damage to the structure. One of the most important factors in preventing corrosion of concrete is the creation of appropriate coating on the bars with structural and weather conditions. Experience has shown that the use of stone, brick or wood pieces as a barrier between the rebar and the concrete surface has never been able to provide a suitable rebar coating on the rebar surface, and in these circumstances is usually due to the lack of integrated rebar coating in the rebar. Spots are less likely to be corroded because of the lack of a similar size, the spacers are efficient, affordable and lightweight parts that can provide a seamless coating on the rebar surface. From Spacers: Creating seamless, economical and inexpensive reinforcing coating on the surface Lightweight, easy transport, speeding up the spacing to cover the barrier, less manpower, and thus speed up the project's full concrete impact due to the presence of hollow holes in the structure or failure to replace the bars for some reason. How to use the spacer: The hard fix spacer has two aprons designed to lock the rebar inside. The rebar is mounted on the Spicer hard drive seat and secured by lock lugs. After the rebar is mounted on the underside of the rebar to the surface of the mold or concrete floor, it will provide concrete cover on the rebar.