Air stapler AS-8016 Hyundai

The type of needle in this model is C80 80 air punch punch and the scratch capacity is 100 punches. And has a needle crown equal to 12.8 mm. Also, the length of the needle used in this device is 6-16 mm. If the needle gets stuck inside the nose while working with an air blower, remove the device from the air hose, remove the punches from the barrel, open the upper forehead with an Allen wrench, and remove the needle using a narrow tail. When placing the punch inside the case, be careful not to allow dust or any other small objects to enter the case. Wear goggles and earphones when working with the device. The puncher throws the punch hard and is very dangerous due to the lack of a protective lever to the slightest hand contact with the trigger. The punches to the wood are very high and scratching. So it is better to use a protective earphone. Do not use capsules such as oxygen capsules and gas capsules to use a punch because there is a possibility of explosion. If you are tired, do not use a punch because this tool needs care and is very dangerous in case of negligence. If the air temperature is zero or below zero, you should heat the device for better performance. . Take the punches out of the barrel and shoot once every 4 seconds.