MTOPLASTE D-130 concrete lubricant Clinic Beton Iran

MTOPLASTE D-130 concrete lubricant

MTOPLASTE D-130 concrete lubricant additive, low consumption with strong lubrication properties and dispersion of cement particles and controlled retardation effect for concrete. MTOPLASTE D-130 concrete lubricant is a liquid additive that affects cement particles. This product acts as a strong lubricant and disperses cement particles and has a controlled retardation effect.

Low dosage plasticizing admixture
for concrete
Based on ASTM C-494 Type B, C and G standard
BS 5075 Part 1

Applications of MTOPLASTE D-130 concrete lubricant:

Concreting in hot weather and where a controlled delay in initial setting is considered.

Bulk concrete, such as the body and foundation of the dam.

To improve internal adhesion, efficiency and compaction in concretes that are not suitable for granulation or aggregate shape.

Large beams and bridge decks, etc., where the reduction of vibration prevents operational leakage.

Features and specifications of MTOPLASTE D-130 concrete lubricant

- It limits the amount of shaking and as a result the occurrence of honeycomb phenomena and executive seams is reduced.

- Concreting problems are reduced in hot weather. This is possible by improving and maintaining the efficiency of concrete.

- Improves troweling and surface polishing.

- It creates the opportunity to save on the mixing plan.

- Reduction of permeability.

- Improving the durability of concrete.

Performance of MTOPLASTE D-130 concrete lubricant

MTOPLASTE D-130 concrete lubricant is compatible with all types of cements, including anti-sulfate cement and modified type 2 cement. For use with special cements, please contact the technical department of Iran Concrete Clinic.

MTOPLASTE D-130 concrete lubricant should not be mixed with other additives. If there is another additive in the design, add it separately to the concrete mixture.

Considerations of MTOPLASTE D-130 concrete lubricant:

Color: dark brown liquid

Specific gravity: 1.185 to 1.195 grams per cubic centimeter at 25 degrees Celsius

Incoming air: less than one percent

Chlorine content: less than 0.1%

Nitrate content: No nitrates

Freezing point: 0 degrees Celsius, if it freezes, it can be recovered by heating and stirring.

Flammability: non-flammable

MTOPLASTE D-130 concrete lubricant compounds

MTOPLASTE D-130 concrete lubricant should be used in the stages of concrete production along with water and aggregate. Never add it to dry cement. It is not necessary to increase the mixing time.

Amount of MTOPLASTE D-130 concrete lubricant

In all cases, it is suggested to conduct workshop tests to determine the exact amount of concrete additive required. The following figures can be used to start these experiments:

In workshop concrete production and where shaking time and polishing the concrete surface is a priority, amounts of 160 to 280 ml per 100 kg of cement should be used to start the test.

For ready-mixed concrete, which is considered to have a longer service life, the amounts of 280 to 420 ml per 100 kg of cement and depending on the required characteristics of the design, this amount may be increased up to 700 ml per 100 kg of cement. More quantities are determined according to the conditions and available materials.

Initial setting time of MTOPLASTE D-130 concrete lubricant

MTOPLASTE D-130 concrete lubricant has a controlled effect on initial setting time. The initial setting of concrete depends on the type of cement and the ambient temperature.

Effects of additional use of MTOPLASTE D-130 concrete lubricant

Overuse of MTOPLASTE D-130 lubricant can cause the following:

Delay in initial and final seizures

Slight increase in air bubbles

Increasing the performance of concrete

If the processing is done correctly, there will be no significant impact on the strength of concrete and it may even be a little more than normal concrete. In very high consumption amounts and the use of anti-sulfate cement, the retardation effect is intensified.

MTOPLASTE D-130 concrete lubricant coating surface

MTOPLASTE D-130 concrete lubricant must be added to the mixture with a special distributor such as the one offered by Iran Concrete Clinic.

How to store MTOPLASTE D-130 concrete lubricant

MTOPLASTE D-130 concrete lubricant should be stored in a covered environment away from direct sunlight and high heat. The useful life of this material is one year under the above storage conditions.

Failure to comply with the suggested storage conditions will damage the product or its container.

Purchase and price of MTOPLASTE D-130 concrete lubricant

Making the market is a database and a network of manufacturers and suppliers of construction products that introduces companies and specialized reviews of construction products. The general purpose of building a market is to establish a direct relationship between the buyer and the producer. Dear buyers, to know the price of concrete lubricants, refer to the market system and buy MTOPLASTE D-130 concrete lubricant from reliable sellers.

Manufacturers and suppliers can register in the market construction system and participate in the special sales festival by placing construction products and inserting the suggested price and increase the sale of their products.