MTOTILE3000 polymer tile adhesive Clinic Beton Iran

MTOTILE3000 is formulated on the basis of synthetic polymers, micronized mineral powders and water-sealing chemical compounds, which has very good adhesion to all kinds of materials and will not dissolve in water at all after drying and setting.

The tile adhesives produced by this company can be supplied in four types according to the surface under work and the amount of adhesion required
is.

Normal tile glue
Polymer tile adhesive
Antique tile adhesive
Powder tile adhesive

The production of these products complies with ASTM 482, BSEN12003, DINEN1348, BSEN1324 standards.

Expenses

Pasting tiles on old tiles
Sticking tiles on plaster, wood or stone surfaces
Structures that have stretch, contraction and volumetric expansion.
Precast concretes that have a smooth surface
A building that requires less weight and high execution speed.
Construction of waterproof concrete and mortar

special features

Very high resistance
Ease of tile installation
Save time and money
Strength against building movements (vibration, contraction and expansion)
Can be used on cement walls, concrete, old tiles, stone, mosaic and even plaster
Installation without destroying and removing the old work
Very good flexibility (P-MTOTILE3000)
Waterproof and insoluble in water after drying
(P-MTOTILE3000)
Physical and chemical characteristics
Specific gravity 1.4 gr/cm3
White color
Paste physical state
pH 7
Working temperature C˚10 to C˚35

Consumption

The amount of consumption depends on the type of work and how the ridges on the back of the ceramic tile are, and it is usually equal to 2.5 kg for each square meter.

consumption instruction

The surface under the work must be dry, clean, grease-free and have sufficient holding power. If the work surface already has another coating, such as wall paper, the paper must be removed from the wall first, and then primed with the help of primer. The work done with plaster should be primed before installing the tile adhesive (primer is a diluted solution of concrete sealing adhesive).

To install the tile on the tile, first remove any grease from the tile surfaces and remove some of the old tile glaze with an ax. Spread the glue on the wall with a trowel or a combed spatula with a maximum area of one square meter and a thickness of 3 to 4 mm.

Install the tiles on the adhesive within 5 to 10 minutes, then secure it in place with a tap, and if the tile is not installed on the wall during this time, the crust created on the adhesive will prevent it from sticking to the tile.
The tiles installed on the wall reach their final strength after 48 hours and after this period
You can start tying, and the desired surface can be used two days after tying.
For installation with tile adhesive, at least 60% of the back of the tile should be coated with adhesive. The shelf life of tile adhesive is 6 months in closed containers.

packing

MTOTILE3000 is available in 5, 12 and 25 kg buckets.

Maintenance method

The temperature required for installing tile adhesive is at least 5 to 25 degrees Celsius. The storage period away from moisture, freezing, heat and direct sunlight will be possible up to 6 months in the original and unopened packaging.

Purchase and price of MTOTILE3000 polymer tile adhesive

Making the market is a database and a network of manufacturers and suppliers of construction products that introduces companies and specialized reviews of construction products. The general purpose of building a market is to establish a direct relationship between the buyer and the producer. Dear buyers, to know the price of tile adhesive, refer to the market system and purchase MTOTILE3000 polymer tile adhesive from reliable sellers.

Manufacturers and suppliers can register in the market construction system and participate in the special sales festival by placing construction products and inserting the suggested price and increase the sale of their products.