MTOFIX 10 reinforcement planting paste Clinic Beton Iran

MTOFIX 10 rebar planting paste is a solvent-free 3-component product based on bisphenol A epoxy resin and polyamide hardener, which is designed for rebar planting and bolt planting in reinforced concrete. Reinforcement planting paste on vertical surfaces. Conforming to BS 6319, ASTM C882-05 and ASTM C881-78 standards

Properties and effects of MTOFIX 10 reinforcement planting paste

• Very high adhesion to concrete and steel.
• Extremely high tensile and bending resistances.
• It is self-condensing.
• High chemical resistance.
• The lifespan of this material is longer than that of concrete.
• It is not water absorbent.

Applications of MTOFIX 10 reinforcement planting paste

• Planting rebar and incobolt in concrete or stone
• Installing parts and fixing them

The consumption of MTOFIX 10 reinforcement planting paste

First, we calculate the volume of the cavity and subtract the volume of the rebar from it, and according to the specific weight of the rebar planting paste, which is equal to 2.2 grams per cubic centimeter, the amount of consumption is calculated.

How to use MTOFIX 10 reinforcement planting paste

The surfaces of the place of use must be free of any grease, dust, rust, loose and unstable particles and moisture. The two components A and C should be mixed using an electric mixer to ensure complete mixing (about 2 to 4 minutes). Then add component B to the mixture and mix as before.

Pour the final mixture into the holes in a period of less than 20 minutes and place the reinforcements inside the holes after derusting and cleaning any grease or pollutants, and by turning the reinforcement, its surfaces are not in full contact with the paste. Make sure to install MTOFIX 10 rebar.

Note 1: Always combine the amount of ingredients that can be consumed within 20 minutes.

Note 2: It is necessary to strictly observe the proportions and never change the proportions without coordination with the technical office of Iran Concrete Clinic.

Note 3: Since the two-component reaction is exothermic, the ambient temperature is very effective on the hardening rate. Therefore, be sure to inform the technical office of the company beforehand about the temperature of the performance area.

Note 4: Never expose the material to direct sunlight before use.

Note 5: Never use solvent to dilute this material.

How to store MTOFIX 10 reinforcement planting paste

Store this product in a covered place away from sunlight and rain. Avoid excessive pressure. The useful life of the product is about 12 months if it is kept in proper conditions and in the original packaging.

Specifications and features of MTOFIX 10 reinforcement planting paste

• Appearance: Part A is liquid, part B is liquid, part C is powder.
• Color: Part A is colorless and yellowish, part B is colorless, part C is gray.
• Specific weight: A + B + C 2.2 grams per cubic centimeter.
• Usage time: 20 minutes after mixing the ingredients.
• Surface drying time: 4 hours.
• Final drying time: 24 hours.
• Obtaining final resistance: 7 days.

Chemical resistance of MTOFIX 10 reinforcement planting paste

• 70% sulfuric acid: very good
• Nitric acid 20%: Excellent
• Citric acid 10%: Excellent
• Lactic acid 10%: Very good
• Sodium hydroxide 50%: Excellent
• Toluene: Excellent
• Gasoline: Excellent
• Hydrochloric acid 37%: Excellent
• 50% phosphoric acid: very good
• 10% Tartaric Acid: Excellent
• Sodium sulfate 25%: Excellent
• Hydrogen peroxide: bad
• Engine oil: Excellent
• Methanol: Good
• Stone: Bad

Mechanical resistance of MTOFIX 10 reinforcement planting paste

• Compressive strength: 850 kg/cm2
• Bending strength: 13.8 MPa
• Tensile strength: 41.3 kg/cm2

protection and safety of MTOFIX 10 reinforcement planting paste

Be sure to use gloves and safety glasses when using, as with all chemical-based products, it may cause damage. In case of possible contact with the eyes, immediately wash it with water for 15 minutes and consult a doctor. In case of skin contact, wash it thoroughly.

Confirmation of the quality of MTOFIX 10 reinforcement planting paste

All products offered by Iran Concrete Clinic are in accordance with international quality standards

Contact us to get the price of MTOFIX10 and MTOFIX11 reinforcement planting paste.

Products similar to MTOMIX 10 reinforcement planting paste

• MTOMIX 11 reinforcement planting paste
• MTOFIX 10-2P 2-component planting paste

Purchase and price of MTOFIX 10 reinforcement planting paste

Making the market is a database and a network of manufacturers and suppliers of construction products that introduces companies and specialized reviews of construction products. The general purpose of building a market is to establish a direct relationship between the buyer and the producer. Dear buyers, for information about MTOFIX 10 reinforcement planting paste, refer to the market building system and buy MTOFIX 10 reinforcement planting paste from reputable sellers.

Manufacturers and suppliers can register in the market construction system and participate in the special sales festival and increase the sales of their products by placing the construction products and inserting the suggested price.