2-component planting paste MTOFIX10-2P Clinic Beton Iran

Structural epoxy paste adhesive for installing rebars and installing reinforcement tapes and sheets, two-component epoxy paste adhesive, solvent-free and with high mechanical resistance. Suitable for horizontal and vertical surfaces. It can also be used to plant steel and composite rods.

Applications of 2-component planting paste MTOFIX10-2P

2-component planting paste MTOFIX10-2P is a gel adhesive with a wide application range that does not shrink when it hardens and creates an excellent connection to building materials. The 2-component planting paste MTOFIX10-2P hardens quickly and its mechanical and chemical stability is very good. These features make it used in many executive tasks, including the following:

• Sticking tape and composite sheets on concrete, steel, wood, stone and other building materials
• Structural connection of steel plates to concrete, wood and other building materials
• Repairing damaged concrete surfaces and filling surface cavities
• Rebar and screw planting in concrete
• As a glue filling empty spaces
• As a leveling layer and foundation for surface resistance

Features and specifications of 2-component planting paste MTOFIX10-2P

Properties and effects of 2-component planting paste MTOFIX10-2P

1. Excellent adhesion to concrete and most building materials
2. Obtaining excellent initial and final resistances
3. Excellent chemical stability
4. Stability against shock and vibration
5. Colored components to ensure proper mixing
6. It has good moisturizing properties and does not require a primer or bonding layer on dry surfaces
7. Easy to use, little smell
8. It does not drain and does not flow
9. It does not shrink when it dries
10. By adding silica sand to it, it becomes a repair mortar
11. It does not cause steel corrosion
12. It is suitable for running on horizontal and vertical surfaces

2-part MTOFIX10-2P planting paste coating surface

The work surface must be firm and free of loose particles. Clean the surface of dust, cement leachate, oil, grease, curing agent, fats, decomposable materials, and other materials that cause non-adhesion. Surface preparation can be done by spraying, sanding or roughing. The work surface must be dry before implementation, if it is wet, concrete primer must be used. Level the surface holes and empty spaces with MTOSIVE 1020 repair material.

Method of use of 2-component planting paste MTOFIX10-2P

First, shake each component well. Add component B to component A and mix using a slow speed drill (up to 400 rpm) fitted with a suitable stirrer for three minutes, or until streaks of color disappear and the mixture is uniform. be obtained To prepare smaller quantities, it is enough to pour one volume or weight measure of component B with three measures of component A in a clean container and mix. Mix only an amount of MTOFIX10-2P 2-Part Concrete Rebar Planting Adhesive that can be used during the curing period. To prepare MTOFLOW650R Epoxy Adhesive Mortar, add one cup of silica sand (1-2 mm) to one cup of mixed MTOFIX10-2P and mix until a uniform product is obtained. To know how to buy and the price of 2-component planting paste MTOFIX-10-2P, you can contact the technical experts of Iran Concrete Clinic.

A - For the sheet:

Spread the mixed MTOFIX10-2P on the surface with the help of a spatula, trowel or trowel with a thickness of at least 2 mm. Also, spread the prepared mixture on the surface of the plate or composite sheet with a thickness of 1.5 mm using a toothed trowel. Place the plate or sheet on the surface during the working time and use a rubber roller to press it evenly so that the excess glue comes out and a layer with a maximum thickness of 3 mm remains. Wipe off excess adhesive.

B- For anchoring:

From the mixture, with the help of a trowel or the force of its own weight (gravity), we insert the material into the cavity that was prepared earlier and was emptied of dust with a compressor as a chemical anchor, and we insert the rod or bolt into it and rotate it to remove the excess mortar. . External arming should not be done before 24 hours. Epoxy glue reaches the desired strength after 7 days.

Amount of 2-component planting paste MTOFIX10-2P

MTOFIX10-2P: about 200 to 250 grams per cavity

Considerations of the 2-component planting paste MTOFIX10-2P

• Minimum layer thickness: 0.5 mm
• Maximum layer thickness: 5 mm
• The age of concrete should be between 21 and 28 days, which depends on its curing and drying conditions

Methods of cleaning tools in the use of 2-component planting paste MTOFIX10-2P

Tools and work tools must be cleaned at the end of each work session or when work is interrupted. Unhardened materials can be washed with the recommended solvent. Hardened materials can only be removed by mechanical methods.

How to store the 2-component planting paste MTOFIX 10-2P

Keep MTOFIX 10-2P two-component planting paste away from sunlight on the pallet and protect it from high temperature and rain. The shelf life of this product is 12 months in unopened original containers.

MTOFIX10-2P 2-component planting paste packaging

The 2-component planting paste MTOFIX10-2P is supplied in 1.5 kg packaging (total components). Along with Iran Concrete Clinic cartridge that you can see in the pictures.

Protection and safety of 2-component planting paste MTOFIX10-2P

MTOFIX 10-2P 2-component planting paste may cause skin damage, use personal safety equipment such as gloves, glasses and work clothes when working. In case of possible contact with the skin, eyes and mucous membranes, immediately wash the area with plenty of warm water and go to the clinic.

Quality approval of MTOFIX 10-2P 2-component planting paste

All the products that are produced and supplied by Iran Concrete Clinic (Mehrazan Paydar Consulting Engineers) are in accordance with international quality standards. Contact us to get the price of MTOFIX 10-2P 2-component planting paste.

Other products similar to MTOFIX 10-2P 2-component planting paste

• MTOFIX 11 reinforcement planting paste
• MTOFIX 10 reinforcement planting paste

Purchase and price of 2-component planting paste MTOFIX10-2P

Making the market is a database and a network of manufacturers and suppliers of construction products that introduces companies and specialized reviews of construction products. The general purpose of building a market is to establish a direct relationship between the buyer and the producer. Dear buyers, for information about MTOFIX 11 reinforcement planting paste, 2-part MTOFIX10-2P planting paste, refer to the market system and order to buy MTOFIX10-2P 2-part planting paste from reliable sellers.

Manufacturers and suppliers can register in the market construction system and participate in the special sales festival and increase the sales of their products by placing the construction products and inserting the suggested price.