Magnetic Drill KBM 80 auto FEIN

Drills are one of the most widely used and most used tools in professional industrial or home use. Drills can be used to abrasive, open and close screws, polishing, or even cutting, etc. Drills include a variety of components, such as: On / Off keySwitch, rotate speed, active key, and disable lock lock mode. Hold the switch on the rotary switch for the depth gauge to adjust the drill scroll to the desired level. Three systems: The three systems are divided into automatic and wrenches which require special wrenches to tighten the three manual systems, which are called three-wrenches, but for the three automatic systems the process is well done by hand. Accepts. Round and Right Round Left: Rounding left and right is critical to using a drill as a screwdriver. However, you will be able to close and open the screws as well. Normally the drills move round the clock (right round) to pierce the wall. This is also true for moving screws. But if you want to open the screw you need to turn your drill clockwise. This is adjusted by the 2-way button above the main drill button. Drills come in a variety of sizes and are used for various applications such as piercing walls, wood, iron and so on. The FEIN company was founded in 1867 in Stuttgart, Germany, and in 1895 invented the first electric drill. Manually invented the world's first magnetic drill in 1909. In spite of 151 years since its launch, Fine is firmly committed to its home country of Germany and manufactures all of its products in Schwäbisch Gmünd, Germany. KBM 80 auto magnetic drill is a professional and industrial magnetic drill. It is a special technique. Designed and manufactured entirely in Germany, the drill is designed to work under constant conditions. The main difference between this model and the other magnetic drilling machines available in the market is the automatic and intelligent loading system. That is, the tool will automatically penetrate the workpiece without having to force the user to perform the rounding operation. The working procedure of this machine is that due to the hardness of the workpiece and due to the pressure applied to the motor of the machine, it optimally adjusts its forwarding speed after the machine has completed its rounding operation. The initial advance will be turned on and off. This automatic advancement will save time and cost in high drilling runs, as well as reduce the time of drilling time, making it possible to schedule hours by dramatically reducing the failure of round drill bits and reducing device failure. Something is possible. This magnetic drill has a 3-speed manual gearbox and can be digitally adjusted in five stages on each gear. Its engine power is 2000 watts, which enables professional rounding up to 80 mm (80 mm with diamond drill and up to 65 mm with HSS drill) in metal and drills up to 32 mm (18 mm in automatic and 32 mm) Mm in manual mode). This magnetic drill has a cooling-lubrication system attached to the machine so that the coolant-lubrication fluid will flow automatically through a pump to the dump site, even when used horizontally or above. You will not need to use fluid-coolant manually. The rail system is a double-sided magnetic drill that allows for continuous, professional and high-precision work and makes it easy to pass. Time and continuous use of the device, its accuracy is not reduced or shake. The QuickIN drill system is a QuickIN device that allows you to position the drill in just a few seconds with no need for tools. The tool interface of this magnetic drill is MT3 and it can be rotated clockwise and counter clockwise, allowing you to operate with this machine. The whole course range of this 285 mm magnetic drill will give you a great deal of freedom in choosing the working drill tools. Due to the optimum ratio of the magnet to the weight of this device you will be able to use it even above your head or horizontally. The weight of this magnetic drill is 26.4 kg and its length is 4 meters. The interface of the device is in line with the user's vision during operation, and it also features a magnet adhesion display so that the magnet light flashes in the absence of sufficient force to hold the device. Inside the bag is a solid coolant - lubricant, a strap, a central pin, a guard, a pleat hook, an MT3 wedge and a QuickIN Max / MT3 clamping tool. Tehran Consulting Group) is the exclusive representative of German Fine Tools (FEIN) in Iran which is also introduced at www.fein.com. FEIN warranty and after-sales service (FEIN) products are offered at TCG Repair Center. Strengths: - German Made - Intelligent Auto advance system - Double twin rails designed for high precision and continuous operation - High power Fin motor for speed Stable under load - Applying electric pump for optimum lubrication and cooling of drill - Magnet adhesion monitor - Slip sensor - Overload sensor Specifications: - Maximum diameter of carbide drill bit: 80 mm - Maximum diameter of HSS drill bit: 65 mm Depth of travel: 50 mm - Maximum working diameter: 18 mm in automatic mode and 32 mm in manual mode - Working angle: M27 - Max. Treadmill: 50mm - Maximum Diameter of Electricity: 31mm - Drill Holder Circular: QuickIN- Tool Holder: MT3- Course: 145mm- Total Course Range: 285mm- Magnet Power: 18000N- Magnet Base Dimensions: 90 * 270mm - Cable Length: 4 pcs With Device: - Cooling Tank - Lubricant - Retaining Strap - Pleating Hook - Central Pin - Protective Guard - Wedge MT3 - QuickIN Max / MT3 Clip Tool - Special Case