Mini Milling 3258A Tosan

Major burrs, quicker available on the market with the use of the force power work and in models of wired and cordless are produced. On the device the possibility of putting a guard for further protection and also a handle to better control the device with both hands there. . Models of cordless ability to transport, have high and easily they can be anywhere and the freedom of movement of the upper provide. But in front due to the weight of the battery heavier models are wired. Power devices cordless flexible there voltage compared with each other, they. Whatever the voltage of the device, the higher the power it is more, and for heavier it can be used. Burrs, quicker wired power a lot more models cordless are heavy duty proper term trend. Because the power source that are connected in long term use, do not have a problem, and like the models cordless drill battery, all do not. The only problem in the transport and nowhere to place them. The power of the machine wired to the be they and W is determined, and, whatever be the device, higher is more powerful.To choose a stone milling factors, there are several that must be considered geared the most important of these factors include the size of the pages that can be used on the devices installed and also the power of the engine, it is noted that together, the ratio of direct time they do. i.e., whatever the device, more power will have to install the plates, the larger the design is. Pages larger possible cuts deep provides that if the intention of cutting plates with high thickness, there will have to be from burrs, quicker, stronger that the pages on which it is installed used. But have in mind working with them Elegance models, the smaller ones would not.Typically, different devices for pages with sizes 115، 125، 150، 180 and 230 mm are made that the model 115 mm for common uses, and by ordinary people appropriate, have the most popular size to be successful, while models larger for use in workshops and industry are produced.Models smaller, usually the rotation speed is higher, which may be up to 12thousand rpm together reach, but models of larger, typically as close to 6 thousand RPM are, though, that models with higher speed today spread more have found. Due to this higher speed, pages, models, earlier small consumption, but the price of these pages, like the price of your device in comparison with the models, the bigger the cheaper. High-speed rotating disc, cutting it into very dangerous conversion, that at the time of use it must be sure cases, the safety village.Another important point is that at the time of preparation of this tool, it have to be noted., the convenience at the time. The design of the device should be in a way that is in hand, getting it to be comfortable and the same style. Additionally, some of the models anti-vibration design that can be easily work out a few times. Usually on the body, the possibility of installing a handle there are also that to better control the tool with both hands helps this category is usually for the left hand and right hand are separate adjustable. Models with better quality, the possibility of installing the handle on occasion, more to also provide.Features:-has a shell, gearbox, aluminum-has awning, stone, adjustable-equipped with Knob locks dryer gearbox-has a handle side vibration-has power cable 2 meters