Mini Milling AG115-PS Mahak

Most of the milling machines in the market work using electric power and are produced in wired and cordless models. The device has a guard for extra protection and a handle for better control of the device with both hands. . Cordless models have high portability and can be easily used anywhere and provide high freedom of movement. But on the other hand, they are heavier than wired models because of the battery weight. Compare the power of the charging devices by their voltage. The higher the device voltage, the higher its power and can be used for heavier tasks. Wired mills have much more power than cordless models and are more suitable for heavy duty work. Because they are connected to the power supply, they have no problem with long-term use and do not run out of battery life like models. The only problem is their transportation and transportation. The power of wired devices is determined by their power and watts, and the higher the power is.

There are several factors to consider when choosing a milling machine. The most important of these factors are the size of the plates that can be mounted on the machine, as well as the power of the motor, which are directly proportional to each other, ie Designed to install larger pages. Larger sheets allow for deeper cuts, meaning that if the sheets are intended to be cut into thicker sheets, the larger milling sheets on which large sheets are installed should be used. But keep in mind that working with them does not have the elegance of smaller models. Typically, different devices are made for 115, 125, 150, 180, 230, and 2mm plates, which are 115mm in size for regular use by ordinary people and are the most common size, while larger models are most commonly used in Workshops and industries are produced. Smaller models typically have higher rotational speeds that can reach up to 5,000 rpm, but larger models typically have speeds of up to 6,000 rpm, although higher speed models are still widespread today. Because of this higher speed, smaller model pages are consumed earlier, but they are cheaper than the larger models, just like the device itself. The high speed of rotation of the cutting disc makes it a very dangerous tool that must be observed when using it.

Another important point to keep in mind when developing this tool is the convenience of working time. The design of the device should be such that it is comfortable to handle and lightweight. In addition, some models are anti-vibration designed to multiply the ease of work. It is usually possible to mount a handle on the body to help control the instrument with both hands, which is usually adjustable for left and right handed people. Better quality models also allow for batch mounting in more situations. The above mini milling is one of the products of the company Mahak, which is marketed under the model "AG115-PS". It has a speed of 11,000 rpm. This product has a power of 800 watts and is considered an intermediate device. The high speed of this mini milling machine is suitable for working with metals, but if you plan to use it for work on stone, be careful not to break or crack. The plate diameter that can be mounted on this device is 115 mm and its center hole diameter is 14 mm. Other benefits of this device include the ability to install auxiliary handle on both sides, which gives the user more control over the work.

Additional explanations:

- Spindle lock

- Ability to install handle on both sides of the device

- Packaging Dimensions: Length: 37.5, Width: 16, Thickness: 12 cm

- Package Weight: 2600 g