Market construction
Market construction

Two Butterfly Water Pump CDA 1.00 M Ebara

Ebara

The CDA water pump is made of high quality standard cast iron body, which strengthens and reduces body depreciation. Pump coating in single-phase type has thermal protection (thermogard) which prevents any damage caused by heat rise to the pump. The CDA water pump is designed to minimize damage to the capacitor inside the terminal box. The aluminum shell of the motor increases the heat exchange of the motor. The F-class pump motor is capable of withstanding temperatures of 155 ° C.
You can also make a price as a seller
Request a price to negotiate and get a better offer

Suppliers

SuppliersExpiration datePrice (Toman)Minimum order (MOQ)CityPhone number
The price is not recorded

similar products

Two Butterfly Water Pump CDA 1.00 M Ebara

The water pump of the 1.00 M Two-piece Ebara Propeller is suitable for pumping liquids, non-corrosive fluids, pollution-free and solid particles. The impeller of this pump is equipped with two impellers that increase the discharge of the pump. This type of impeller and this type of pump is used when the discharge rate is important. Due to the high quality and reasonable price, the CDA pump can be used to supply water for residential and multi-storey buildings (buildings with It used 9 units and a minimum density of 3 floors), agricultural (pressure irrigation) and industrial applications requiring high water pressure. The single-phase CDA 100M pump impeller is of compact plastic type. This home water pump runs the maximum pressure (39.5 m) and maximum discharge (5.4 m3 / h) under pressure irrigation. The inlet and outlet size of the CDA 100M pump is about 1 inch. The maximum allowable temperature for the fluid used is 40 ° C. The nominal flow of the pump is 6.1 amps under normal operating conditions, which may be greater or less due to the curve-based pump performance. The CDA 100M pump is equipped with a brass air valve that can be easily opened and closed by hand. It also has a brass drain bolt which allows for the freezing of the screw in cold weather and cold air. The base material of the CDA water pump is plastic in the front part and the bottom part is plastic. It has a gland for cable entry into the terminal box to prevent water from penetrating into the terminal box. Its motor has IP44 protection class. CDA Water Pump has 18 months warranty and 10 years of after sales service, which is almost unique in Iran.

Product Specifications

Warranty
has it
Weight (kg)
15.7
Body material type
Cast iron
The type of blade material
Nuryl (compressed plastic)
Shaft type
Brass
The type of shell material
Cast iron
Fluid type
Water
Ability to immerse
does not have
Inlet pipe diameter (inch)
1
Engine power (HP)
Up to 1
Number of phases
single phase
Insulation class
F

User's comments and scores