Profile Cutting Machine 5901 Ronix

How does the profile work?
The first step is to make sure the saw is in good condition and capable of cutting profiles, so it is best to check the base of the saw, cable and switch.
Always shorten and lift the power cord of the profile device to suit your work environment, as cutting it can pose a great danger to you and everyone in the vicinity.
Wearing safety equipment such as glasses, gloves, and work clothing will prevent you from being harmed by cutting parts, so be sure to keep safety before work.
Before cutting, be sure to mark the slot on the profile piece with a marker, and make a thickness profile to estimate the cutting time, if the cutting time is long enough to prevent the workplace from warming up several times. Cut and start cutting again. One of the important points of using profiles is to not use this tool on concrete, steel, cement and even aluminum alloy surfaces, although the profiling machine has the ability to cut this type of work, but because of the main mission of this profile cutting machine. The cutting of other materials will slow it down and may damage the user in subsequent cuts.
Also, it should not be used repeatedly in order to prevent damage to the machine during operation and should be rested briefly to prevent the motor coil from being burnt.
Avoid hitting the device to start or remove it, and avoid placing heavy objects on its grip.
At the end of the cutting operation, clean the blade and place it in its proper position.
Ensure that the appliance is not plugged in after the job is completed. The blades of the machine need to be replaced as long as they are not sharpened at all. Discard damaged blades of profile because it may slip off the device and cause you damage.

An electric profile saw is a tool commonly used to cut hard objects such as all kinds of metals, ceramic, concrete, wooden and even glass objects, which are cut by a stone plate (cutting disc). The profile plate diameter is generally 355 mm. In general, cutting curved or tube-shaped objects is a little harder and requires manual cutting of the longer ones. For easier and more accurate cutting, a profile saw is always used. The RONIX Profiler saw is a Model 5901 (portable) for moving and working in different work environments and also has a special handle for ease of movement. Cutting accuracy is an important criterion when operating this machine. The Ronix profile saw has high precision for cutting straight and oblique objects and retains the precision in long cuts. Apart from the mechanical factors of the machine, another factor affecting the precision of cutting is the stability of the machine during cutting. The trunks and trusses of the Ronix profile machine have maximum sheet thickness, in accordance with the standard to maximize cutting accuracy. The clamp on the tray can be used to keep the workpiece steady during cutting.

Due to the cutting of hard objects, the pressure on the motor and gear of the machine increases. The Ronix 5901 Profiler saw has a powerful engine and rigid gears for use in various applications. Motorized saws and cushions are engineered to match the most up-to-date machines in the world, and gear is made from the finest raw materials, hardened and heated, to withstand the toughest cuts. The durable and hardened gears of this device extend the service life and durability of this device. The Ronix profile saw rotates the stone plate at 4000 rpm to make cutting easier and smoother, as well as power of 2300 watts.

Other Features :
- Maximum cutting capacity:
Round cross section: 130 mm
Square cross-sectional area: 120 mm
Rectangular cross section: 130 × 120 mm
Angular cross-sectional area: 140 × 140 mm
- Easy and fast operation for consecutive cuts
- Has 2m hard cord
- Equipped with 2300 Watt high-power motor made of industrial armature and cushion made by fully automatic machines
- Equipped with industrial gearbox for performing continuous and long lasting cutting
- Equipped with an industrial ergonomic dustproof key to reduce long-term wear and tear
- Equipped with shaft lock for easy rocker plate replacement
- Adjustable 45 degree angle from the right
- 2 positioning positions for different section cuts