Market construction
Market construction

Simple rebar 22 A1 Khorasan steel

Khorasan steel
Iran

Simple rebar (A1) with current stress of 240 kg / cm2 and fracture stress of 360 kg / cm2 and relative plastic deformation (at breakage);25% known as soft or crude rebar and mostly smooth and without Tread. This rebar is suitable for forging, reshaping, and welding operations and is generally known as a dactyl rebar.
You can also make a price as a seller
Request a price to negotiate and get a better offer

Suppliers

SuppliersExpiration datePrice (Toman)Minimum order (MOQ)CityPhone number
The price is not recorded

Simple rebar 22 A1 Khorasan steel

Steel bars are generally used to strengthen concrete and rock structures to withstand tensile forces. Concrete is inherently strong enough to withstand compressive forces, but tensile forces can break it.

The rock structures and mortar walls are almost concrete-like and have relatively poor tensile strength. Some standard rock pieces, such as blocks and bricks, are designed to have special holes for reinforcing rebars. Although high strength tensile materials can be used as reinforcing agents to enhance the tensile strength of concrete, steel and concrete have a particular commonality, which makes them more used than steel for the construction of reinforcing rebars. This is a common aspect of the thermal expansion coefficient and its close proximity to steel and concrete causes the same lengths to change at different temperatures to prevent additional internal stresses in the concrete structure, thus preventing premature destruction of the concrete.

 Rebar grooving is intended to improve adhesion between concrete and reinforcing steel. The tread design on the rebar has no specific specifications, but the spacing between the tread and the tread height must be in accordance with the relevant standards. Treads made on the steel body often provide adequate adhesion to the steel and concrete by providing sufficient friction surface, but are still likely to be removed by a force sufficiently strong.

Size (mm)
22
Unit weight (kg / m)
2.98
Cross section (mm2)
380

Surrender strength (N / mm2)
240
Elongation (%)
25
Tensile strength (N / mm2)
360

User's comments and scores