Solar inverter PIP2024HS PF1 EPsolar

Phase inverters are divided into two major types of single phase and three phase. Also in terms of output waveforms, the following four types are divided: square waveform output sinusoidal correction (regular) sinusoidal correction output (step) sinusoidal pure output recommended for solar systems, inverters It is pure sine, but if the purpose is purely for lighting or power for the CCTV, the use of quasi-sinusoidal inverters is not a problem for the system. The other types of solar inverters are two types of grid connected and grid-independent. Switches the power supply to AC mains by converting DC voltage to AC Nand. The most famous brands of inverter connected to the network are SMA, Growatt and Steca. Cotek, Minwell's Meanwell, EPEVER and SMA are also well-known brands in network-independent inverters. Among the important parameters to consider are the following: Deep Discharge Protection Battery Overvoltage Shutdown Over Voltage Shutdown or Over Temp / Overload Protection Over load Short Circut Protection Polarity Protection System Reverse Polarity Protection Automatic operation in various conditions (load detection, stand by mode, overload, overvoltage, reconnection, etc.) Input voltage proportional to presentation scheme Full 220V Sinusoidal Solar Output with 50 MPH SIP2024HS PF1 Solar Frequency Features such as PWM 50A solar chargeable, applicable with or without connection to grid input, programmable parameters, etc. This product, which is a DC to AC converter, has 2000 watts of output power and a maximum charge current of 50 amps. Other specifications: This inverter receives power from solar panels and its charging algorithm is PWM. The output waveform of this solar power converter, which is 55 * 272 * 100mm and weighs 6.5kg and is marketed in electrical and electronic equipment, is a pure sine (Pure Sine). The input voltage in this solar inverter suitable for pumps, elevators, extruders, etc. is 24V DC and the output voltage is 230V AC.