Market construction
Market construction
Market construction
Mechanical Installations
Tanks
Galvanized Tank
Water storage tank 40000litr-5mm Bamin Tahvie

Water storage tank 40000litr-5mm Bamin Tahvie

Bamin Tahvie
Iran

With the expansion of cities, and reduce ground water pressure municipal water reduction, and in some areas is cut back. Installation of the pump in order to compensate the deficit of push and supply the required water pressure equipment, the best and the most sensible way. But the use of the pump as long as meets the needs of the building would be that the water in the duct suction they exist, or, in other words, municipal water cut is not. If the pump directly to the piping system and the tributary municipal water connected at the time of definitive water or a sharp reduction in pump pressure at the risk of the phenomenon of cavitation and damage to pump impeller, and also the possibility of burning the electric water pump there. Beside all these cases, connect the water pump directly to the network municipal water is illegal, and in the face of the organization, relevant encounter a legal will.The direction of fix all these problems can be the source of the water storage used.
You can also make a price as a seller
Request a price to negotiate and get a better offer

Suppliers

SuppliersExpiration datePrice (Toman)Minimum order (MOQ)CityPhone number
The price is not recorded

Water storage tank 40000litr-5mm Bamin Tahvie

This source prevents the pump from working without a water supply at a definite time or lowering the water pressure. According to national building regulations, buildings with more than 4 floors or more than 10 apartment units must have a storage tank to supply the building with water for 12 hours. Consider consuming 150 liters per person per day. For example, a building with 10 residential units and an average of 3 inhabitants per unit should have a storage capacity of about 2250 liters.  Reasons to Install Water Storage Tank:   Preventing water interruption in piping Distribution of water consumed by the building at any time when the water supply is cut off from the municipal network.To prevent pressure and peak consumption in the urban water supply network Control of water pressure required for plumbing distribution of water consumed by the buildingZoning (distribution) of water distribution in tall buildingsProtection of urban water network  Conditions and location of water storage tank or reservoir The reservoir or water source should not be installed in areas exposed to floods, groundwater, or under sewage and unsanitary water.If the reservoir and reservoir are exposed to groundwater, sufficient space around the water should be provided for periodic visits to ensure that groundwater does not penetrate into it.If a water storage tank or reservoir is installed inside the building, it should be installed in such a way that it can be easily seen and maintained and cleaned. If the water storage tank is installed in a free space or on the roof, it must be covered with appropriate insulation to prevent frost or heat, and the lid of the tank or manhole should be protected with removable insulation.

Product Specifications

Diameter (m)
2.7
Dehydration volume (liters)
40000
Weight (kg)
4170
Body thickness (mm)
5
Length (mm)
7400
Source deployment mode
Horizontal

User's comments and scores