The DH33 CALOREX pool humidifier is able to absorb and completely remove moisture from the humid space of indoor pools. The material of the body of the CALOREX pool humidifier is made of fiberglass and aluminum.
This makes the dehumidifier resistant to rust. In general, the basis for selecting the capacity of humidifiers is based on the amount of ambient humidity, pool surface, the presence or absence of proper ventilation and pool heating.
You can also make a price as a seller
Request a price to negotiate and get a better offer
The CALOREX pool dehumidifier passes air with saturated steam through its cooling evaporator coils, then the vapor or moisture in the air evaporates quickly and turns into cold water droplets (water distilled by the drain pipe). drain is removed from the device). Then the cold air passes through the condenser coil and the heat is recovered and the heated air returns to the environment with less moisture.
CALOREX pool humidifier is a small wall and has air heating option, which is suitable for dehumidification in clothes drying rooms, warehouses and storage centers, operation stations of electronic equipment, sports complexes and locker rooms. The CALOREX pool dehumidifier has a quality structure, selectable appearance, simple installation and requires minimal maintenance and care.
Attributes :
Automatic with full automatic operation systemIt has silent cooling fansHas a dryer and distiller with polyester coatingIncludes main components such as evaporator, compressor and condenserEquipped with a sensor for measuring and indicating the amount of moisture and shows the relative humidity of the environment at all times.It has a volume of adjusting the humidity between 20 and 80%Compressor insulation in the Calorex pool dehumidifier optimizes power consumption and reduces device noise, greatly increasing its efficiency.The power supply of the CALOREX pool is 230 volts, single phase and 50 Hz.Power consumption: 0.75 kWHumidification rate 1.25 liters per hourMaximum flow rate: 440 cubic meters per hourDimensions (width, depth, height): 78 -22.5 -65.3 cmWeight: 37 kgDrain pipe size: 10 mm
Product Specifications
Temperature range (˚C) performance
15-35
Moisture removal performance (L / hr)
1.25
Maximum air flow performance (m³ / hr)
440
Electricity consumption (kw)
0.75
Produced heating energy at a temperature of 80 degrees (kw)