Ceiling support jack 4.5 Beton Saze

Jack overhead with the name of Jack, metal jack, telescopic and metal candle is also known to be at different heights can be made on the basis of the minimum height (when closed) and maximum height (when being open), and the thickness and diameter of the pipe, the restraint load-bearing different. Also, by means of a nut embedded in the middle of each jack, adjustable height desired between the maximum and minimum height in each is provided. Due to the importance of resistance of this means against pressure loads incurred and prevent it from bending and spilling debris design based on the principles of the international standard is one of the priorities of this complex has been that with great effort The Specialists of the complex managed to receive the certification, the quality standard of EU CE, especially in the production of Steel Jack were. Maximum Barber, Jack the ceiling of 1500 kg is. Use the jack of the ceiling done in the scaffolding of a height greater than 4 M it is suggested will and in this case, the use of a scaffold of modular in terms of technical, the better. Tube and the internal jack of the ceiling to the diameter of 5 cm and a tube outside of it to a diameter of 6 cm are and the thickness of the tube sheet 2 and 2.5 MM is.