MTONANO CX-800 waterproofing and concrete repair powder Clinic Beton Iran

MTONANO CX-800 waterproofing and concrete repair powder is based on nano technology and designed for specialized applications of concrete repair and sealing of general and special concrete, brick and stone structures. Waterproofing powder and concrete repairer based on nano technology with unique features.

Applications of MTONANO CX-800 waterproofing and concrete repair powder

100% concrete leak stopper, without contaminating drinking water, resistant to chemicals, 100% adhesion to the original concrete, suitable for repairing damaged concrete, penetrating to a depth of 90 cm, compatible with concrete breathing, one lifetime warranty and easy to use, cathodic protection, can be used in all concrete structures such as dams, reservoirs, pools, sealing clarifiers...

Properties and effects of MTONANO CX-800 waterproofing and concrete repair powder

In the repair using waterproofing powder and MTONANO CX-800 concrete repair, there is no need to apply bonding layer, which saves money and time.

MTONANO CX-800 waterproofing and concrete repair powder penetrates about one meter into concrete, stone, brick, after the activation of the crystals, it does not allow water to pass from inside or outside to the concrete.

MTONANO CX-800 waterproofing and concrete repair powder is based on cement, so it will not have any pollution for drinking water like the use of bituminous materials or epoxies.

The expected life of MTONANO CX-800 waterproofing and concrete repair powder is the same as the life of concrete and will never be damaged during operation.

Quick and easy implementation method

economic efficiency

Method of using MTONANO CX-800 waterproofing and concrete repair powder

In reservoirs, fountains, tunnels, chambers inside which valves and mechanical and electronic equipment are located (such as water treatment plants next to swimming pools), we usually see water leakage due to horizontal and underground water leakage, from In order to control and permanently solve this problem, after preparing the concrete surface using sandblasting, water jet or other existing methods, the surface of the operation is completely healthy and clean compared to the implementation of waterproofing powder. And MTONANO CX-800 concrete repair was done thinly and with a big brush.

Also, in order to seal severe bursting of concrete on the bottom of swimming pools and fountains, after removing the old and damaged concrete and repairing and renovating it based on the executive standards and specifications and using the types of repair mortars provided, from the sealing powder slurry and Use MTONANO CX-800 for concrete repair.

In the cracks, gaps and seams of the implementation, the diameter of the gap is about 2 mm, first, using a suitable mechanical tool, create a V-shaped gap, and then use MTONANO CX-800 waterproofing and concrete repair powder. He filled and repaired the place.

In the structures and places where we see leakage or water flow, after cleaning the point, cracks and damaged areas and the place of leakage water should be removed from algae, fungi and weak concretes using mechanical tools and Waterjet, first we put some of MTONANO CX-800 waterproofing and concrete repair powder on the damaged area for a few seconds and keep it until after a few seconds and chemical interactions, the desired problem is permanently solved. be made

Caring for tools when working with MTONANO CX-800 waterproofing and concrete repair powder

Clean and wash used tools and equipment immediately after use.

MTONANO CX-800 concrete repair and waterproofing powder coating surface

In the application mode using a brush and sealing direction, each kilogram can cover 1 square meter depending on the condition of the surface.

How to store waterproofing powder and repair concrete MTONANO CX-800

Store this product in a closed environment away from direct sunlight and high temperatures. In tropical regions, this product should be stored in a ventilated place.

Not paying attention to the proper storage method will damage the product or its container.

Protection and safety of MTONANO CX-800 concrete repair and waterproofing powder

Like all chemical products, be careful to avoid contact with eyes, mouth, skin and food. In case of contact with skin and eyes, immediately wash it with water for 15 minutes and consult a doctor. If accidentally swallowed, seek medical attention. Close the containers after use and refer to the product safety brochure for information on special storage or disposal of the remaining materials.

Purchase and price of MTONANO CX-800 waterproofing and concrete repair powder, Iran Concrete Clinic

Making the market is a database and a network of manufacturers and suppliers of construction products that introduces companies and specialized reviews of construction products. The general purpose of building a market is to establish a direct relationship between the buyer and the producer. Dear buyers, to know the price of concrete waterproofing, they can refer to the Bazar Manufacturing System and buy MTONANO CX-800 waterproofing and concrete repair powder from Iran Concrete Clinic from reliable sellers.

Manufacturers and suppliers can register in the market construction system and participate in the special sales festival by placing construction products and inserting the suggested price and increase the sale of their products.