Market construction
Market construction
Market construction
Basic Materials
Concrete Additives
Concrete Sealer
Solvent bituminous insulation MTOPROOFOIL Clinic Beton Iran

Solvent bituminous insulation MTOPROOFOIL Clinic Beton Iran

Clinic Beton Iran
Iran

Solvent bituminous insulation MTOPROOFOIL Iran concrete clinic:

MTOPROOFOIL is a fiber-free, solvent-based bituminous coating. Its color is dark brown and after drying it forms a black flexible coating.
You can also make a price as a seller
Request a price to negotiate and get a better offer

Suppliers

SuppliersExpiration datePrice (Toman)Minimum order (MOQ)CityPhone number
The price is not recorded

Solvent bituminous insulation MTOPROOFOIL Clinic Beton Iran

MTOPROOFOIL is a fiber-free, solvent-based bituminous coating. Its color is dark brown and after drying it forms a black flexible coating. Its completed layer is hard and watertight and is a good protection against water and vapor transfer.

applications

  • General sealing of concrete surfaces, asbestos, roof insulation, paving stone and wood
  • Metal protection: creating a coating on the metal frame and Tubes.
  • Insulation: protective coating against moisture in warehouses
  • Protection of buried structures such as foundations and retaining walls

Points

  • Chemical stability
  • formable
  • Advantageous
  • Easy implementation
  • cold performance

packing

MTOPROOFOIL is available in 20 and 200 kg containers.

Compounds

Combination of special powders with bitumen and solution in special solvent

Procedure

Surface preparation:

  • Make sure the surfaces to be repaired are free of oil, grease, or other common processing materials. MTOPROOFOIL can be applied directly to concrete surfaces treated with non-degradable curing agents such as MTOCURED550. If the surfaces are dusty, dilute MTOPROOFOIL in a ratio of 1 to 1 with solvent number 2 and apply it as a primer on the surface and allow it to dry and then apply the main layers. This product can also be applied on wet surfaces, although in order to obtain a waterproof layer, both the structure and MTOPROOFOIL must be allowed to dry completely.

standards

According to ACI 515-79, Guide for the use of protective and aesthetic coatings on concrete surfaces, part 2, part 1/1/2, 2/1/2 and 3/1/2.

Function

MTOPROOFOIL coated concrete surfaces do not absorb salt solutions. While the uncovered surfaces absorb the salts in the wet soil and cause the rusting of the reinforcements and concrete corruption.

Performance

Stir before use. Because settling occurs, it is best to roll the barrels on the ground before emptying them. Apply with a brush, brush or spatula, in one or two layers as needed. Apply the next layers in the same direction as the previous layer and create a time interval of 12 to 24 hours between the layers. When it is used as the bottom layer of flooring, or it is necessary to apply coating on it, it is better to sprinkle sand on the second layer so that the connection is better. Do the coating after 24 hours and with a thickness greater than 50 mm.

Covering

Up to 4 square meters with every liter per layer depending on the roughness of the surface.

Care of work equipment

If MTOPROOFOIL is not dry yet, you can clean it with solvent. But in case of drying, first physically shave the device as much as possible and then clean the residues with paraffin, oil or solvent.

inventory

Store in a covered environment away from sunlight and high temperature. In tropical regions, it should be stored in a ventilated place. Because there is sedimentation, during long-term storage, turn the barrels upside down every month to mix again. The useful life of this product is 12 months, provided that it is kept under the above conditions. Failure to observe the proper storage method may damage the product or its container.

safety tips

As with all chemical products, be careful when using and storing. Avoid contact with eyes, mouth, skin and food. In case of possible secretion in the eyes and skin, clean it immediately. If accidentally swallowed, see a doctor. Close the lid of containers after use, use in a ventilated environment and do not inhale it closely.

Purchase and price of MTOPROOFOIL solvent bitumen insulation at Concrete Clinic Iran

Making the market is a database and a network of manufacturers and suppliers of construction products that introduces companies and specialized reviews of construction products. The general purpose of building a market is to establish a direct relationship between the buyer and the producer. Dear buyers, to know the price of concrete waterproofing, refer to the market construction system and buy MTOPROOFOIL solvent bitumen insulation from reliable sellers.

Manufacturers and suppliers can register in the market construction system and participate in the special sales festival by placing construction products and inserting the suggested price and increase the sale of their products.

User's comments and scores