AQUAFIN-1K waterproofing mortar Clinic Beton Iran

AQUAFIN-1K waterproofing mortar is a non-flexible cement-based waterproofing material consisting of quartz sand, Portland cement and additives. There is no compound in this product that weakens or strengthens concrete. Non-flexible cement base waterproofing grout.

Properties and effects of waterproofing mortar AQUAFIN-1K

1. It does not contain concrete weakening substances.
2. It has excellent adhesion to the ground.
3. It is resistant to hydrostatic pressure.
4. After drying, it becomes a hard and permeable layer.
5. It has DVGW W 270 drinking water approval.
6. It is resistant to penetration of aggressive water in concrete according to DIN 1048 standard.
7. As there is a possibility of instant cracking on the surface, it is better to use AQUAFIN-2K/M waterproofing mortar.

Method of using AQUAFIN-1K waterproofing mortar

Urban service engineering: in indoor structures, sewage affairs, sealing of water tanks and reservoirs, sealing of swimming pools, thermal pipes (heating systems and pits, etc.)
Building structures: underground, storage
Water structures: retaining walls, pools, tunnels, dams and reservoirs
Old structures that are not protected against soil moisture.

AQUAFIN-1K waterproofing mortar covering surface

First, all sand particles, uneven surfaces, looseness and protrusions should be removed from the surface and pollution such as fat, grease and bitumen compounds should be removed by a suitable cleaner.

Porous cement surfaces are prepared for application by grinding and moistening the surface. All cement materials should be connected with a layer of cement plaster.

The loose pebbles removed from the concrete surface should be removed well with an ax to a depth of approximately 2 cm and repaired with Mortar group III) or ASOPLAST-MZ Peru.

During the application of AQUAFIN-1K waterproofing mortar and its hardening time, water must be prevented from accumulating on the isolated surface.

AQUAFIN-1K waterproofing mortar compositions

AQUAFIN-1K waterproofing mortar is in the form of cement powder. By observing the mixing ratio, mix a sufficient amount of it with clean water so that it can be applied with a brush or spray. The application should be done in several layers in the structure, with the amount of consumption of kg/m2-2 in each layer.

The freshly applied waterproofing mortar AQUAFIN-1K should be protected from direct sunlight, polluted air, rain and frost.

Protection and safety of waterproofing mortar AQUAFIN-1K

1. AQUAFIN-1K waterproofing mortar contains cement and its alkaline substances react with moisture, therefore:

2. Protect your eyes and see a doctor if the substance comes into contact with your eyes.

3. Use gloves and in case of skin irritation, wash immediately with water.

Purchase and price of waterproofing mortar AQUAFIN-1K, Iran Concrete Clinic

Making the market is a database and a network of manufacturers and suppliers of construction products that introduces companies and specialized reviews of construction products. The general purpose of building a market is to establish a direct relationship between the buyer and the producer. Dear buyers, to know the price of concrete waterproofing, they can refer to the Bazar Manufacturing System and buy the AQUAFIN-1K waterproofing mortar of Iran Concrete Clinic from reliable sellers.

Manufacturers and suppliers can register in the market construction system and participate in the special sales festival by placing construction products and inserting the suggested price and increase the sale of their products.