Jack Flasher Life

A flasher is a warning lamp that is placed outside or inside a parking lot and flashes when the parking jack is operated, as defined in the steering circuit and programming board, and is switched on and off. Parking door flasher and parking door flasher are installed in the top safe of Iran.

What is the function of the flasher?

The flasher actually activates the parking signal to announce the start or end of the parking jack to the user and acts in different ways in different situations.

In some parking jacks, the command to flash and turn off the flasher is issued from the jack circuit of the jack, and in others, the control circuit gives only constant power to the flasher, and the automatic switching on of the flasher is performed by the IC programmed inside. The parking door door flasher is installed in the top safe of Iran.

Flashers also have 2 types, 24 volts and 220 volts.

The type of flasher blinking in many of the command circuits of Iranian and Italian parking jacks, as well as shutters and barriers, is such that when the door is opened, the flasher flashes quickly and turns on and off every second or load, and when When the door is closing, it blinks slowly and turns on and off every 2 seconds.

Automatic door flasher (electromechanical-hydraulic) is actually a flashing lamp that is installed above the entrance door to inform others about the working condition of the door. Generally, yellow flashers light is a warning sign in the new model of door jack flashers. Partco parking is also used in the yellow range. This new flasher starts working when the door is opened or closed and turns off when the door is closed.

The use of new lamps in these flashers, in addition to creating more light to inform others, has a very long lifespan and greater resistance to various climatic conditions. In general, the working voltage of the flasher is always equal to the working voltage of the jack. But if the operating voltage of the flasher is 24 or 220 volts, the flashing circuit is inside the flasher itself.

Flasher Life is made of two simple parts, a base and a cover made of transparent plastic that, in addition to being impermeable to moisture, also has a high resistance to the sun's rays. A metal base and an antenna and cable connector Coaxial is provided with this product. The antenna connector is for installing the antenna to the flasher and the metal base is for installing the life flasher on the wall and the coaxial cable is for connecting the antenna and the flasher to the jack control center.