Two-way solenoid valve 032U7120 Danfoss

In general, the solenoid valve is responsible for interrupting the fluid flow in an emergency. To do this, a signal is sent as a current to the solenoid coil, and when the coil is activated, the fluid path is disconnected or connected. Electric valves are produced in two types: NO (Normally open and NC (NC (Normally close), which indicates the normal state of the valve. Danfoss solenoid valves have different types of valves, including piston, diaphragm, needle, motorized. And ... they are. Electric valves are divided into two-way, three-way, four-way types according to the number of outlet and fluid inlet ducts and are displayed as 2/2, 2/3 and 2/4, the first number from the left indicates the number of valves and The second number indicates the number of valves. In Danfoss solenoid valves, the coil and the body are usually separated and placed on top of each other with a small pressure. Here are some tips to help you buy an electric valve:The type of fluid and the chemical and mechanical properties of the fluid usedFluid pressure in the inlet and outlet of the solenoid valvePaying attention to the compatibility of solenoid valve with environmental conditions and considering the risks of explosion, humidity, air temperature, magnetic field, foreign particles, etc.Attributes :2/2 electric solenoid valve3.4 inch connection size3/4 inch aperture size0.53 inch drive sizeSuitable for neutral (non-corrosive) fluids and waterMaximum pressure for steam fluid up to 4 timesMaximum working pressure 10 timesServo diaphragmNormal closed - NCReliable choice - high efficiencyHas a variety of international approvals