MTOBOND P-1800 epoxy glue Clinic Beton Iran

MTOBOND P-1800 epoxy glue is a permanent epoxy glue for connecting concrete, mortar and stone installation inside or outside the structure. This product is able to withstand some moisture before and during hardening, but after hardening it becomes a waterproof layer. The final adhesion strength of this product is higher than the tensile strength of concrete. MTOBOND P-1800 epoxy adhesive does not decrease in volume and forms a smooth and stress-free layer. Intermediate epoxy glue for concrete repairs, cold sealing joints, concrete-to-concrete, steel-to-stone connection.

MTOBOND P-1800
Epoxy bonding agent for concrete repairs, Bonding concrete to concrete, steel and granolithic
Based on ASTM C881 Type 2 standard

Uses of MTOBOND P-1800 epoxy adhesive

MTOBOND P-1800 epoxy glue can be used on clean, hard and durable surfaces such as: steel, glazed tiles and bricks, stone and ceramic bricks, bricks or mosaic floors, as well as for covering stone surfaces, carpets, concrete He used old rotten and industrial and semi-industrial bricks.

MTOBOND P-1800 epoxy glue is for connecting concrete, mortar and stone installation inside and outside the structure. In order to buy and sell and to know the price of epoxy concrete glue, be in touch with Iran's concrete clinic consultants.

Properties and effects of MTOBOND P-1800 epoxy adhesive

High resistance
No shrinkage
Moisture tolerance
long lasting
Resistant to chemical attacks
Fast installation and acquisition of resistance
Weighed packaging

MTOBOND P-1800 epoxy adhesive packaging

MTOBOND P-1800 epoxy glue is supplied in 3 kg packages including base resin and reactive.

Features and specifications of MTOBOND P-1800 epoxy adhesive
Specific weight: 1485 kg/m3
Effective time: at 25°C for 2.5 hours and at 40°C for 1 hour.
Appearance hardening: 9.5 hours at 25°C and 5.5 hours at 40°C
Final hardening: 7 days
How to use MTOBOND P-1800 epoxy glue
Surface preparation:

Clean the surfaces thoroughly. All loose pieces, cement leachate, dust, curing agent, floor hardeners, oil, grease, fat, bitumen or paint should be roughed up. Polished surfaces should be roughened. If there is oil, grease, fat, tar and the like, they should be removed before doing other preparation work. All leachate or traffic and brittle concrete should be removed or scraped by scarification or sandblasting to obtain a hard surface. New concrete must be dried to minimize shrinkage and deformation. If the concrete surface is saturated with concrete mold oil, it is necessary to remove the entire depth of saturation with tile sand, scraping and, if necessary, destroying all the contaminated concrete. All processing materials must be cleaned or shaved and the operation must be performed on a clean and dust-free surface.

Mixing:

Pour all the contents of the smaller container (reactive part) into the larger container (base resin). Mix it completely. To mix, use a hard spatula or a slow drill with a stirrer to get a uniform color mixture. This process usually takes about 3 minutes. Do not try to mix or dilute any part of it.

Implementation guide:

MTOBOND P-1800 epoxy glue should be applied in a uniform layer on the surface with the help of a short brush or trowel or spatula. It is left for a period of time and then the top coating is applied. This time depends on the working conditions, but it is usually 60 minutes at 25 degrees and 45 minutes at 40 degrees. During this time, the MTOBOND P-1800 epoxy adhesive surface must be kept clean. Especially on horizontal surfaces.

Plastering and plastering:

When coating or applying mortar on MTOBOND P-1800, the required work methods should be considered. It is necessary to process paving stone, plaster or mortar. For this purpose, you can wet the surfaces with clean water and place a polyethylene sheet on it, or cover the surfaces with MTOCURE series processing materials. Failure to pay attention to these items will cause cracking or breaking the mortar. The expansion joints in the structure should be continued in the mortar or surface coating and after drying, they should be filled with all kinds of mtoflex group products.

Temperature:

Because cold weather delays the setting of MTOBOND P-1800 epoxy adhesive, try to avoid applying it in cold temperatures as much as possible. Although MTOBOND P-1800 epoxy glue hardens slowly at low temperatures, +7 to +10 degrees Celsius can be considered as the minimum working temperature for successful coating.

Caring for MTOBOND P-1800 epoxy adhesive tools

As long as MTOBOND P-1800 epoxy glue is not completely dry, it can be cleaned with solvent number 2, but after drying, it should be cleaned by hitting or burning the tool.

MTOBOND P-1800 epoxy adhesive coating surface

Each kilogram can cover 2 to 2.7 square meters depending on the surface condition.

How to store MTOBOND P-1800 epoxy glue

Store MTOBOND P-1800 epoxy glue in a closed environment away from direct sunlight and high temperatures. In tropical regions, this product should be stored in a ventilated place. Not paying attention to the proper storage method will damage the product or its container.

Protection and safety of MTOBOND P-1800 epoxy adhesive

As with all chemical products, care should be taken to avoid contact with eyes, mouth, skin and food (this instruction applies to its steam until it dries). In case of contact with skin and eyes, clean it immediately. If accidentally swallowed, get medical attention. Close the containers after use and refer to brochure for special storage or disposal of leftover materials

Refer to product safety.

Purchase and price of MTOBOND P-1800 epoxy adhesive

Making the market is a database and a network of manufacturers and suppliers of construction products that introduces companies and specialized reviews of construction products. The general purpose of building a market is to establish a direct relationship between the buyer and the producer. Dear buyers, to know the price of sealing concrete glue, refer to the market system and buy MTOBOND P-1800 epoxy glue from reliable sellers.

Manufacturers and suppliers can register in the market construction system and participate in the special sales festival by placing construction products and inserting the suggested price and increase the sale of their products.